headache

straight to the point, when our project comes to the wiring, i swear it really gives me a big headache. when we took it off the car, we had to cut most of them, there was no way which we could keep them completely. so when we put them on the table, all the components, the ECU and the wire harnesses are seperately in a really big mess. even some of them are not part of our project, but you just have to take them together as well. there is no way you can work them out without a wiring diagram. so we downloaded all the wiring diagram related to EFI system. i have learned the theory before, but when all the wires, ECU and componnets put on the table, you just have no idea how struggle you can be. after consulting with Tony, we determined to start from clearing all the wires first, coz they tangled together. it would be very wise if we labled them and taped them in order when we took them off the car. but now we have to face the fact which we did not do so. we started from the wirs on the ECU, we put them one by one and taped them so it won't tangle with others again. honestly, i even read the diagram wrong when i first tried to work on it. after all the wires are labled and cleaned, we continued to located all the connectors to each sensors.

seriously, even when i am doing all calculations i nerve got headache, but this just keeps me struggling.